organism GNM-1783292075-7219
a living generative artwork, grown from a genome. the picture below is not an upload: it is rendered from the instruction set printed underneath, and the same genome grows the same artwork on any device, forever.
genome fingerprint
SPRL · CELL · SPR2 · CUT · HTC · DOT
phase 1 · embryonic
Body plan. The Voronoi substrate is laid down.
- 1. GANGLE-1 spun sites into a golden-angle spiral at 79% influence, tightness 0.72.
- 2. CELL-1 laid down 115 sites via VORONOI (uniform), — MINIATURE (dense mosaic) morph, — composition envelope TOP_TWO_THIRDS at 81% extent, — 1 Lloyd iteration(s), boundary noise 0.129.
phase 2 · structural
Bones. Load-bearing organization is imposed.
- 3. SPIRAL-2 pulled sites into a Fermat golden-angle spiral around (0.43, 0.31) at 51% strength: tightness 0.90, rotation 60°.
phase 3 · geometric
Reshape. Cells are deformed and re-tessellated.
- 4. CUTOUT-3 cut pieces out of cells larger than 2.5× the median — each piece scaled to 59%, rotated 3°, and lifted out as a new cell.
phase 4 · decorative
Paint. Color, texture, and pattern land on the substrate.
- 5. HATCH-4 applied DOTTED hatching at 166°, spacing 0.57mm, to giants only (per-cell major-axis orientation).
- 6. DOT-4 placed Poisson-disk dots on the top 70% of cells by area: 0.30mm radius, 0.93mm min spacing, IN_CELLS placement, SAME as cell (darker) color.